DongCheng 710W Electric Metal Shear - DJJ25

1. Product Overview

The DongCheng DJJ25 is a high-performance Electric Metal Shear engineered for precision and ease when cutting sheet metal. Featuring a rugged design and high torque, it is capable of handling various metals, including steel and aluminum. It is an indispensable tool for blacksmithing, metal fabrication, and professional workshop applications.

2. Technical Specifications

• Model: DJJ25
• Rated Power Input: 710W
• No-Load Speed (Strokes per Minute): 2200 spm
• Max. Cutting Capacity (by material):
• Mild Steel: Up to 2.5 mm
• Hard Steel: Up to 2.0 mm
• Stainless Steel: Up to 2.0 mm
• Aluminum Plate: Up to 3.2 mm
• Minimum Cutting Radius: 45 mm
• Net Weight: Approx. 2.3 kg

3. Key Features

• High Performance: The 710W motor delivers robust power to cut through thick metals effortlessly.
• Clean and Precise Cuts: Delivers smooth, burr-free edges without deforming the material.
• Ergonomic Design: Its lightweight build and optimized grip allow for maximum control and reduced operator fatigue during extended use.
• Versatility: With a tight 45 mm cutting radius, the tool excels at both straight-line cutting and intricate curved maneuvers.
• Double Insulation: Engineered with a double-insulated system to ensure maximum user safety against electrical shocks.

4. Operating Instructions

1. Preparation: Ensure the cutting blades are sharp and securely tightened. Connect the tool to a power source matching the required voltage (typically 220V).
2. Marking: For maximum precision, it is recommended to pre-mark the cutting line on the metal sheet.
3. Startup: Grip the handle firmly and engage the power switch.
4. Cutting Process: Insert the edge of the metal between the blades. Push the tool forward steadily and slowly along the marked line. Do not apply excessive force; let the tool's speed do the work.
5. Curvatures: When navigating curves, rotate the tool slowly while following the line, keeping in mind the minimum turning radius of 45 mm.
6. Post-Operation: Turn off the tool, disconnect it from the power source, and clean away any metal filings or debris.

5. Included Accessories (Typical)

• Cutting blade set
• Hex Wrench (for blade replacement)
• Thickness Gauge (to verify material compatibility)
• Spare Carbon Brush set

6. Warranty

A one-year maintenance warranty is provided.

Safety Tip: Always wear protective gloves and safety goggles while operating this tool to prevent injuries from flying metal shards or sharp edges.