3M Half Face Respiratory Mask with Filters, Model 6200

The 3M 6000 Series Respirator (Model 6200) is a half-facepiece mask designed to provide user protection and comfort. It is characterized by its ultra-lightweight and ergonomic design that does not obstruct the field of vision. It is intended for reusable use by replacing filters and cartridges, making it an economical and eco-friendly choice compared to disposable masks.

1. Technical Specifications

• Model Number: 3M 6200
• Primary Material: Soft and flexible Thermoplastic Elastomer (TPE)
• Color: Gray/Black
• Connection Type: Bayonet - a twist-on filter attachment system
• Assigned Protection Factor (APF): 10
• Weight: Lightweight for long-term comfort
• Head Harness Type: 4-point harness to ensure a secure fit on the face

2. Key Features

• Comfort and Fit: Flexible material provides a soft feel on the face with easily adjustable head straps for a customized fit.
• Balanced Design: The side-mounted cartridge design improves balance during wear and enhances visibility.
• Economical and Practical: Can be disassembled, cleaned, and reused multiple times; only the filters are replaced upon expiration.
• Multi-Protection: When used with approved cartridges, it provides protection against gases, vapors, and particles at concentrations up to 10 times the Permissible Exposure Limit (PEL).
• Versatility: Compatible with a wide range of 3M filters and cartridges.

3. Recommended Industries

The mask is used in a wide variety of fields, including:

• Construction
• General manufacturing and industrial maintenance
• Oil, gas, and mining industries
• Marine and rail transportation
• Spraying, painting, and chemical handling operations

4. Instructions for Use

• Installation: Install the appropriate filters or cartridges (sold separately) by aligning the notches with the facepiece and twisting them until securely locked (Bayonet system).
• Donning: Place the mask over the mouth and nose, pull the top head strap over the crown of the head, and fasten the bottom straps behind the neck.
• Adjustment: Tighten the straps to ensure a snug seal on the face without excessive pressure.
• Seal Check: Perform a positive or negative pressure seal check before starting work to ensure no air leakage from the sides.
• Cleaning: After use, remove the filters and clean the respirator body with warm water and a neutral detergent, then dry thoroughly before storage.